ADTRAN 1000R Series - Manual (Page 137)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 137
debug pppoe client
Use the debug pppoe client command to activate debug messages associated with point-to-point protocol
over Ethernet (PPPoE) operation in the AOS. Debug messages are displayed (real time) to the terminal (or
Telnet) screen. Use the no form of this command to disable the debug messages.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, and 4000 and Total Access 900 Series
units.
Command History
Release 6.1 Command was introduced.
Usage Examples
The following example activates debug messages associated with PPPoE activity:
>enable
#debug pppoe client