ADTRAN 1000R Series - Manual (Page 565)

Command Reference Guide ADSL Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 565
training-mode [G.DMT | G.LITE | Multi-Mode | T1.413]
Use the training-mode command to configure the ADSL training mode.
Syntax Description
G.DMT Specifies ANSI full-rate mode.
G.LITE Specifies ANSI splitterless mode.
Multi-Mode Specifies auto detect mode.
T1.413 Specifies ANSI T1.413 mode.
Default Values
By default, the training mode is set to Multi-Mode.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000 Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example sets the training mode to T1.413:
(config)#interface adsl 0/1
(config-adsl 0/1)#training-mode T1.413