ADTRAN 1000R Series - Manual (Page 1361)

Command Reference Guide Route Map Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1361
set local-preference <value>
Use the set local-preference command to restrict traffic to a local autonomous system. Use the no form of
this command to cancel the local preference.
Syntax Description
<value> Sets the local preference value. (Valid range: 0 to
4,294,967,295.)
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 Series and
Total Access 900 Series units.
Command History
Release 10.1 Command was introduced.
Usage Examples
The following example sets the local preference fro MyMap to a value of 100:
(config)#route-map MyMap permit 100
(config-route-map)#set local-preference 100