ADTRAN 1000R Series - Manual (Page 1224)

Command Reference Guide CA Profile Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1224
serial-number
Use the serial-number command to specify that a serial number will be included in the certificate request.
Syntax Description
No subcommands.
Default Values
By default, this command is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
By default, this command is set to no serial-number, which means that the serial number is not included
in the certificate requests.
Usage Examples
The following example configures AOS to include a serial number in the certificate request:
(ca-profile)#serial-number