ADTRAN 1000R Series - Manual (Page 1349)

Command Reference Guide Quality of Service (QoS) Map Commands
61200510L1-35E Copyright © 2005 ADTRAN 1349
set dscp <0-63>
The set dscp command is an optional command for a QoS map that can be used to modify the DSCP field
(on matching packets) to the specified value.
Syntax Description
<0-63> Specifies the decimal DSCP value.
Default Values
No default value is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 6.1 Command was introduced.
Usage Examples
This command sets the DSCP value (for all matching traffic) to 46:
(config)#qos map VOICEMAP 10
(config-qos-map)#set dscp 46