ADTRAN 1000R Series - Manual (Page 45)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 45
clear counters vlan <vlan id>
Use the clear counters vlan command to reset counters on the specified virtual local area network
(VLAN) interface.
Syntax Description
<vlan id> Specifies a valid VLAN interface ID (1 to 4094).
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example resets the counters on VLAN interface 7:
>enable
#clear counters vlan 7