ADTRAN 1000R Series - Manual (Page 252)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 252
show mac address-table aging-time
Use the show mac address-table aging-time command to display information regarding the amount of
time dynamic entries remain in the medium access control (MAC) address table.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following is a sample from the show mac address-table aging-time command for a switch
configured with an address-table aging-time:
>enable
#show mac address-table aging-time
Aging Time
----------------
300 Seconds