ADTRAN 1000R Series - Manual (Page 70)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 70
clear port-security violation-count <interface id>
Use the clear port-security violation-count command to clear the violation count associated with a
particular interface.
Syntax Description
<interface id> Clears the information for the specified Ethernet interface. Type clear
port-security violation-count interface ? for a complete list of applicable
interfaces.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following command clears the violation count associated with the Ethernet interface 0/1:
>enable
#clear port-security violation-count eth 0/1