ADTRAN 1000R Series - Manual (Page 1245)

Command Reference Guide Crypto Map Manual Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1245
set session-key [inbound | outbound]
Use the set session-key command to define the encryption and authentication keys for this crypto map.
Variations of this command include the following:
set session-key inbound ah <SPI> <keyvalue>
set session-key inbound esp <SPI> authenticator <keyvalue>
set session-key inbound esp <SPI> cipher <keyvalue>
set session-key inbound esp <SPI> cipher <keyvalue> authenticator <keyvalue>
set session-key outbound ah <SPI> <keyvalue>
set session-key outbound esp <SPI> authenticator <keyvalue>
set session-key outbound esp <SPI> cipher <keyvalue>
set session-key outbound esp <SPI> cipher <keyvalue> authenticator <keyvalue>
Syntax Description
inbound Defines encryption keys for inbound traffic.
outbound Defines encryption keys for outbound traffic.
ah <SPI> Specifies authentication header protocol.
esp <SPI> Specifies encapsulating security payload protocol.
cipher <keyvalue> Specifies encryption/decryption key.
authenticator <keyvalue> Specifies authentication key.
Default Values
There are no default settings for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 Series units.
Command History
Release 4.1 Command was introduced.