ADTRAN 1000R Series - Manual (Page 606)

Command Reference Guide E1 Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 606
show test-pattern
Use the show test-pattern command to display results from test patterns inserted using the test-pattern
command (see test-pattern [clear | insert | ones| p215 | p220 | p511 | qrss | zeros]
on page 611 for more
information).
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 7.1 Command was introduced.
Usage Examples
The following is sample output from this command:
(config)#interface e1 1/1
(config-e1 1/1)#show test-pattern
QRSS Errored Seconds: 6