ADTRAN 1000R Series - Manual (Page 482)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 482
port-auth max-req <number>
Use the port-auth max-req command to specify the maximum number of identity requests the
authenticator will transmit before restarting the authentication process.
Syntax Description
<number> Specifies the maximum number of authentication requests.
Default Values
By default, the maximum number of authentication requests is set at 2.
Applicable Platforms
This command applies to the NetVanta 1000 and 1000R Series units.
Command History
Release 10.1 Command was introduced.
Usage Examples
The following example sets the maximum number of authentication requests at 4:
(config)#port-auth max-req 4