ADTRAN 1000R Series - Manual (Page 68)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 68
clear mac address-table dynamic [address <mac address> |
<interface id>]
Use the clear mac address-table dynamic command to remove dynamic media access control (MAC)
addresses from the MAC address table.
Syntax Description
address <mac address> Removes a specific MAC address from the table (format: AA:AA:AA:AA:AA:AA).
<interface id> Removes the MAC address of a specific interface. Type clear mac address-table
dynamic interface ? for a complete list of applicable interfaces.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example removes the dynamic address A0:B1:C2:D3:E4:A1 from the MAC address table:
>enable
#clear mac address-table dynamic address A0:B1:C2:D3:E4:A1
The following example removes all dynamic addresses from the MAC address table:
>enable
#clear mac address-table dynamic