ADTRAN 1000R Series - Manual (Page 454)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 454
ip subnet-zero
The ip subnet-zero command is the default operation and cannot be disabled. This command signifies the
router’s ability to route to subnet-zero subnets.
Syntax Description
No subcommands.
Default Values
By default, this command is enabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1 Command was introduced.
Usage Examples
The following example subnet-zero is enabled:
(config)#ip subnet-zero