ADTRAN 1000R Series - Manual (Page 839)

Command Reference Guide Demand Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 839
qos-policy out <mapname>
Use the qos-policy out command to apply a previously-configured QoS map to an interface. Use the no
form of this command to remove the map from the interface. The keyword out specifies that this policy
will be applied to outgoing packets.
Syntax Description
<mapname> Specifies the name of a previously-created QoS map (refer to qos map
<mapname> <sequence number> on page 488 for more information).
Default Values
No default value is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 6.1 Command was introduced.
Release 11.1 Command expanded to include the demand interface.
Usage Examples
The following example applies the QoS map VOICEMAP to the demand 1 interface:
(config)#interface demand 1
(config-demand 1)#qos-policy out VOICEMAP