Max-reserved-bandwidth <percent – ADTRAN 1000R Series User Manual
Page 978
Command Reference Guide
HDLC Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
978
max-reserved-bandwidth <percent>
Use the max-reserved-bandwidth command to define the maximum amount of interface bandwidth
reserved for Quality of Service (QoS). Use the no form of this command to return to the default value.
Syntax Description
<percent>
Specifies the maximum amount of bandwidth to reserve for QoS. This setting is
configured as a percentage of the total interface speed. Range: 1 to 100 percent.
Default Values
By default, max-reserved-bandwidth is set to 75 percent.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 11.1
Command was introduced.
Usage Examples
The following example sets the reserved-bandwidth maximum at 80 percent:
(config)#interface hdlc 1
(config-hdlc 1)#max-reserved-bandwidth 80