ADTRAN 1000R Series - Manual (Page 1314)

Command Reference Guide Router (OSPF) Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1314
timers lsa-group-pacing <seconds>
Use the timers lsa-group-pacing command to change the link state advertisement (LSA) refresh interval.
Syntax Description
<seconds> Sets the LSA refresh interval in seconds (range: 10 to 1800).
Default Values
By default, this value is set at 240 seconds.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1 Command was introduced.
Usage Examples
The following example sets the refresh interval for six minutes:
(config)#router ospf
(config-ospf)#timers lsa-group-pacing 360