ADTRAN 1000R Series - Manual (Page 773)

Command Reference Guide ATM Sub-Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 773
pvc <VPI/VCI>
Use the pvc command to select the ATM virtual link for this sub-interface. Use the no form of this
command to remove the link.
Syntax Description >
<VPI/VCI> Specifies the ATM network virtual path identifier (VPI) for this PVC and the ATM
network virtual path identifier (VPI) for this PVC. The VPI value range is 0 to 255,
and the VCI value range is 32 to 65,535.
Default Values
No default value is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example sets the VPI to 8 and the VCI to 35:
(config)#interface atm 1.1
(config-atm 1.1)#pvc 8/35