ADTRAN 1000R Series - Manual (Page 34)

Command Reference Guide Common Commands
61200510L1-35E Copyright © 2005 ADTRAN 34
exit
Use the exit command to exit the current configuration mode and enter the previous one. For example,
using the exit command in an interface configuration mode will activate the Global Configuration mode.
When using the exit command in the Basic mode, the current session will be terminated.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Applicable Command Modes
Applies to all mode command sets.
Applicable Platforms
Applies to all AOS products.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example shows the exit command being executed in the Global Configuration mode:
(config)#exit
#
#- Enable Security mode command prompt
When exiting the Global Configuration mode, remember to perform a copy
running-config startup-config to save all configuration changes.