ADTRAN 1000R Series - Manual (Page 558)

Command Reference Guide Line (Telnet) Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 558
login
Use the login command to enable security login on the line session requiring the password configured
using the password command. Use the no form of this command to disable the login feature.
Syntax Description
No subcommands.
Default Values
By default, there is no login password set for access to the unit.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example enables the security login feature and specifies a password on all the available
Telnet sessions (0 through 4):
(config)#line telnet 0 4
(config-telnet0-4)#login
(config-telnet0-4)#password mypassword