Clear route-map counters <map – ADTRAN 1000R Series User Manual
Page 75
Advertising
Command Reference Guide
Enable Mode Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
75
clear route-map counters <map>
Use the clear route-map counters command to reset route map hit counters.
Syntax Description
<map>
Specifies specific route map to be cleared.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 11.1
Command was introduced.
Usage Examples
The following example clears all route map counters:
>enable
#clear route-map counters
Advertising