ADTRAN 1000R Series - Manual (Page 1264)

Command Reference Guide IKE Policy Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1264
client authentication server list <listname>
Use the client authentication server list command to enable the unit to act as an Xauth server (edge
device).
Syntax Description
<listname> Specifies the named list created with the aaa authentication login command.
Default Values
By default, the router does not act as an Xauth server and extended authentication is not performed.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
When this IKE policy is negotiated and the peer has indicated Xauth via the IKE authentication method
and/or the Xauth vendor ID, this command allows the unit to perform as an Xauth server (edge device).
The specified AAA login method is used to identify the location of the user authentication database. The
client authentication host and the client authentication server commands are mutually exclusive.
Refer to
client configuration pool <poolname> on page 1265 for more information.
Usage Examples
The following example enables Xauth as an Xauth server and specifies which AAA method list to use in
locating the user database:
(config-ike)#client authentication server list clientusers