ADTRAN 1000R Series - Manual (Page 348)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 348
boot system flash <filename> [no-backup | <backup filename>]
Use the boot system flash command to specify the system image loaded at startup.
Syntax Description
<filename> Specifies the filename (located in flash memory) of the image (filenames are
case-sensitive) - image files should have a .biz extension
no-backup Specifies that no backup image is to be saved to the system.
<backup filename> Specifies a name for the backup image.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Functional Notes
Detailed instructions for upgrading the AOS and loading files into flash memory are found on the ADTRAN OS
Documentation CD.