ADTRAN 1000R Series - Manual (Page 278)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 278
show queue <interface>
Use the show queue command to display conversation information associated with an interface queue.
This command shows summary and per-conversation information.
Syntax Description
<interface> Displays the queueing information for the specified interface. Type the show
queue ? command to display a list of valid interfaces.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Release 9.1 Command was expanded to include HDLC interface.
Release 11.1 Demand interface was added.
Usage Examples
The following is a sample output from the show queue command:
>enable
#show queue fr 1
Queueing method: weighted fair
Output queue: 18/25/200/64/1027 (size/highest/max total/threshold/drops)
Conversations 2/4/256 (active/max active/max total)
(depth/weight/highest/discards) 12/256/33/0
Conversation 10, linktype: ip, length: 67
source: 10.100.23.11, destination: 10.200.2.125, id: 0x0000, ttl: 47,
TOS: 0 prot: 17 (udp), source port 99, destination port 99
(depth/weight/highest/discards) 6/256/25/0
Conversation 23, linktype: ip, length: 258
source: 10.100.23.11, destination: 10.200.2.125, id: 0x0000, ttl: 47,
TOS: 0 prot: 6 (tcp), source port 16, destination port 16