Vlan <vlan id – ADTRAN 1000R Series User Manual
Page 531
Advertising
![background image](/manuals/36101/531/background.png)
Command Reference Guide
Global Configuration Mode Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
531
vlan <vlan id>
Use the vlan command to enter the VLAN configuration mode. Refer to the section for more information.
Syntax Description
<vlan id>
Specifies a valid VLAN ID (1 to 4094).
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1
Command was introduced.
Usage Examples
The following example enters the VLAN configuration mode for VLAN 1:
(config)#vlan 1
(config-vlan 1)#
Advertising