ADTRAN 1000R Series - Manual (Page 472)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 472
logging forwarding receiver-ip <ip address>
Use this logging forwarding receiver-ip command to specify the IP address of the syslog server to use
when logging events that match the criteria configured using the logging forwarding priority-level
command. Enter multiple logging forwarding receiver-ip commands to develop a list of syslog servers to
use. Refer to logging forwarding priority-level [error | fatal | info | notice | warning]
on page 471 for
related information. Use the no form of this command to remove a configured address.
Syntax Description
<ip address> Specifies the IP address (in dotted decimal notation) of the syslog server to use
when logging messages.
Default Values
By default, there are no configured syslog server addresses.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example specifies a syslog server (with address 172.5.67.99) to use when logging
messages:
(config)#logging forwarding receiver-ip 172.5.67.99