ADTRAN 1000R Series - Manual (Page 568)

Command Reference Guide BRI Interface Configuration Command set
61200510L1-35E Copyright © 2005 ADTRAN 568
bonding txcid-timer <seconds>
Use the bonding txcid-timer command to specify the value (in seconds) for the bearer channel
(B-channel) negotiation timeout. Use the no form of this command to return to the default value.
Syntax Description
<seconds> Specifies the number of seconds the endpoint allots for negotiating data rates and
channel capacities before considering the bonding negotiation a failure.
Default Values
By default, the bonding txcid-timer value is 5 seconds.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series units.
Command History
Release 1.1 Command was introduced.
Functional Notes
Specifies the length of time both endpoints attempt to negotiate an agreeable value for bearer channels
and channel capacities before deciding the bonding call has failed.
Usage Examples
The following example defines a bonding txcid-timer value of 8 seconds:
(config)#interface bri 1/2
(config-bri 1/2)#bonding txcid-timer 8