ADTRAN 1000R Series - Manual (Page 752)

Command Reference Guide ATM Sub-Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 752
ip dhcp [release | renew]
Use the ip dhcp command to release or renew the DHCP IP address. This command is only applicable
when using DHCP for IP address assignment.
Syntax Description
release Releases DHCP IP address.
renew Renews DHCP IP address.
Default Values
No default values required for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.
Command History
Release 3.1 Command was introduced.
Release 8.1 ATM sub-interface was added.
Usage Examples
The following example releases the IP DHCP address for the ATM sub-interface 1.1:
(config)#interface atm 1.1
(config-atm 1.1)#ip dhcp release