ADTRAN 1000R Series - Manual (Page 708)

Command Reference Guide T1 Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 708
show test-pattern
Use the show test-pattern command to display results from test patterns inserted using the test-pattern
command (refer to test-pattern [clear | insert | ones | p215 | p220 | p511 | qrss | zeros]
on page 713 for
more information).
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 7.1 Command was introduced.
Usage Examples
The following is sample output from this command:
(config)#interface t1 1/1
(config-t1 1/1)#show test-pattern
QRSS Errored Seconds: 6