ADTRAN 1000R Series - Manual (Page 52)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 52
clear host [ * | <hostname>]
Use the clear host command to clear a hostname when using the Domain Naming System (DNS) proxy.
Syntax Description
* Clears all dynamic hosts.
<hostname> Clears a specific host name.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 10.1 Command was introduced.
Usage Examples
The following example clears all dynamic hostnames:
>enable
#clear host *