ADTRAN 1000R Series - Manual (Page 520)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 520
spanning-tree hello-time <seconds>
Use the spanning-tree hello-time command to specify the delay interval (in seconds) between hello
bridge protocol data units (BPDUs). To return to the default interval, use the no form of this command.
Syntax Description
<seconds> Specifies the delay interval (in seconds) between hello BPDUs.
Range: 0 to 1,000,000.
Default Values
By default, the delay is set to 2 seconds.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example configures a spanning-tree hello-time interval of 10,000 seconds:
(config)#spanning-tree hello-time 10000