ADTRAN 1000R Series - Manual (Page 657)

Command Reference Guide Ethernet Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 657
switchport port-security maximum <max value>
Use the switchport port-security maximum command to configure the maximum number of secure
MAC addresses associated with the interface.
Syntax Description
<max value> Specifies the maximum number of secure MAC addresses to be associated with
the interface. Range: 1 to 132.
Default Values
The default value for this command is 1.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example sets the maximum supported MAC addresses for Ethernet interface 0/1 to 2:
(config)#interface eth 0/1
(config-eth 0/1)#switchport port-security maximum 2