ADTRAN 1000R Series User Manual
Page 333
Command Reference Guide
Global Configuration Mode Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
333
aaa authentication login [<listname> | default] [none | line | enable |
local | group <groupname> | group radius | group tacacs+]
Use the aaa authentication login command to create (or change) a named list with the ability to have a
chain of fallback authentication methods for user authentication. Available methods for the fallback
authentication methods are: no authentication (which grants login access without authentication), line
password, enable password, local database, and defined group of servers. The defined server groups may
be TACACS+ or RADIUS servers. For more detailed information on AAA functionality, refer to the
Technology Review section of the command aaa on
Syntax Description
<listname>
Specifies a named login list.
default
Specifies the default list used to authenticate users when no other list is assigned.
none
Access automatically granted.
line
Uses line password (Telnet 0-4 or console 0-1) for authentication.
enable
Uses enable password for authentication.
local
Uses local user database for authentication.
group <groupname>
Uses specified group of remote servers for authentication.
group radius
Uses defined RADIUS servers for authentication.
group tacacs+
Uses defined TACACS+ servers for authentication.
Default Values
The login list named default is the default list used to authenticate users when no other list is assigned.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1
Command was introduced.
Release 11.
The group tacacs+ command was added.
Functional Notes
A user is authenticated by trying the list of methods from first to last until authentication succeeds or fails. If
a method does not succeed or fail, the next method is tried. The local user database method falls through
to the next method if the username does not appear in the database. The group method falls through if the
servers in the remote group cannot be found. Refer to the command
or
for information on defining server groups.