Show radius statistics – ADTRAN 1000R Series User Manual
Page 280
Command Reference Guide
Enable Mode Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
280
show radius statistics
Use the show radius statistics command to display various statistics from the RADIUS subsystem. These
statistics include number of packets sent, number of invalid responses, number of timeouts, average packet
delay, and maximum packet delay. Statistics are shown for both authentication and accounting packets.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1
Command was introduced.
Usage Examples
The following is an example output using the show radius statistics command:
>enable
#show radius statistics
Auth.
Acct.
Number of packets sent:
3
0
Number of invalid responses:
0
0
Number of timeouts:
0
0
Average delay:
2 ms
0 ms
Maximum delay:
3 ms
0 ms