ADTRAN 1000R Series - Manual (Page 156)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 156
ping stack-member
Use the ping stack-member command to ping a member of the stack.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000 and 1000R Series units.
Command History
Release 8.1 Command was introduced.
Functional Notes
This command is available only in stack-master mode.
Usage Examples
The following example pings a member of the stack:
>enable
#ping stack-member 3
Type CTRL+C to abort.
Legend: '!' = Success, '?' = Unknown host, '$' = Invalid host address
'*' = Request timed out, '-' = Destination host unreachable
'x' = TTL expired in transit
Sending 5, 100-byte ICMP Echos to 169.254.0.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 2/2.2/3 ms
#