ADTRAN 1000R Series - Manual (Page 1259)

Command Reference Guide IKE Policy Attributes Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1259
lifetime <seconds>
Use the lifetime command to specify how long an IKE SA is valid before expiring.
Syntax Description
<seconds> Specify how many seconds an IKE SA will last before expiring.
Default Values
By default, lifetime is set to 28,800 seconds.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 Series units.
Command History
Release 4.1 Command was introduced.
Usage Examples
The following example sets a lifetime of two hours:
(config-ike)#attribute 10
(config-ike-attribute)#lifetime 7200