ADTRAN 1000R Series - Manual (Page 118)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 118
debug ip dhcp-server
Use the debug ip dhcp-server command to activate debug messages associated with Dynamic Host
Configuration Protocol (DHCP) server operation in the AOS. Debug messages are displayed (real time) to
the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 2.1 Command was introduced.
Functional Notes
The debug ip dhcp-server command activates debug messages to provide information on DHCP server
activity in the AOS. The AOS DHCP server capability allows the AOS to dynamically assign IP addresses
to hosts on the network.
Usage Examples
The following example activates debug messages associated with DHCP server activity:
>enable
#debug ip dhcp-server