ADTRAN 1000R Series - Manual (Page 44)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 44
clear counters port-channel <interface id>
Use the clear counters port-channel command to reset counters on the specified port channel.
Syntax Description
<interface id> Specifies a valid interface ID to clear (e.g., 1 for port channel 1).
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example clears all counters for port channel 1:
>enable
#clear counters port-channel 1