ADTRAN 1000R Series - Manual (Page 1169)

Command Reference Guide VLAN Database Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1169
apply
Use the apply command to apply changes without exiting the VLAN Database.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this setting.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
Applies changes to the VLAN Database configuration in the running configuration.
Usage Examples
The following example applies changes made, remaining in the VLAN Database:
(config)#vlan database
(vlan)#apply
Changes applied.
(vlan)#