ADTRAN 1000R Series - Manual (Page 340)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 340
aaa on
Use the aaa on command to activate the AAA subsystem. Use the no form of this command to deactivate
AAA.
Syntax Description
No subcommands.
Default Values
By default, AAA is not activated.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
By default, the AAA subsystem is turned off and authentication follows the line technique (local, line, etc.).
Once activated, the AAA lists override the methods specified in the line command.
Usage Examples
The following example activates the AAA subsystem:
(config)#aaa on
Technology Review
AAA stands for authentication, authorization, and accounting. The AOS AAA subsystem currently supports
authentication. Authentication is the means by which a user is granted access to the device (router). For
instance, a username/password is authenticated before the user can use the CLI. VPN clients can also
verify username/password before getting access through the device.
There are several methods that can be used to authenticate a user:
NONE Instant access
LINE-PASSWORD Use the line password (telnet 0-4 or console 0-1)
ENABLE-PASSWORD Use the enable password
LOCAL-USERS Use the local-user database
GROUP <groupname> Use a group of remote RADIUS servers