ADTRAN 1000R Series - Manual (Page 388)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 388
gvrp
Use the gvrp command to enable or disable GVRP on the switch globally.
Syntax Description
No subcommands.
Default Values
By default, GVRP is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 8.1 Command was introduced.
Functional Notes
Disabling GVRP globally will disable GVRP on all interfaces.
Usage Examples
The following example enables GVRP on the switch globally:
(config)#gvrp