ADTRAN 1000R Series - Manual (Page 145)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 145
debug tftp [client | server] packets
Use the debug tftp packets command to activate debug messages associated with Trivial File Transfer
Protocol (TFTP) packets. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use
the no form of this command to disable the debug messages.
Syntax Description
client Activates TFTP client packet debug messages.
server Activates TFTP server packet debug messages.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example activates debug messages associated TFTP server packets:
>enable
#debug tftp server packets