ADTRAN 1000R Series - Manual (Page 481)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 481
port-auth default
Use the port-auth default command to set all global port-authentication settings to their default states.
Syntax Description
No subcommands.
Default Values
No default value is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000 and 1000R Series units.
Command History
Release 10.1 Command was introduced.
Usage Examples
The following example sets all global port-authentication settings to their default states:
(config)#port-auth default