ADTRAN 1000R Series - Manual (Page 629)

Command Reference Guide Ethernet Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 629
mac-address <address>
Use the mac-address command to specify the Media Access Control (MAC) address of the unit. Only the
last three values of the MAC address can be modified. The first three values contain the ADTRAN
reserved number (00:0A:C8) by default. Use the no form of this command to return to the default MAC
address programmed by ADTRAN.
Syntax Description
<address> Specifies a MAC address entered in a series of six dual-digit hexadecimal values
separated by colons (for example 00:0A:C8:5F:00:D2).
Default Values
A unique default MAC address is programmed in each unit shipped by ADTRAN.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1 Command was introduced.
Release 5.1 Command was expanded to include Gigabit Ethernet interfaces.
Usage Examples
The following example configures a MAC address of 00:0A:C8:5F:00:D2:
(config)#interface ethernet 0/1
(config-eth 0/1)#mac-address 00:0A:C8:5F:00:D2