Show ip dhcp-server binding <client ip address – ADTRAN 1000R Series User Manual
Page 221
Command Reference Guide
Enable Mode Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
221
show ip dhcp-server binding <client ip address>
Use the show ip dhcp-server binding command to display the Dynamic Host Client Protocol (DHCP)
server client table with associated information.
Syntax Description
<client ip address>
Optional. Specifies a particular client IP address.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 2.1
Command was introduced.
Usage Examples
The following is a sample output from the show ip dhcp-server binding command:
>enable
#show ip dhcp-server binding
IP Address
Client Id
Lease Expiration
Client Name
10.100.23.64 01:00:a0:c8:00:8f:b3 Aug 15 2002 11:02 AM Router