ADTRAN 1000R Series - Manual (Page 726)

Command Reference Guide ATM Sub-Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 726
dial-backup auto-backup
Use the dial-backup auto-backup command to configure the sub-interface to automatically attempt a
dial-backup upon failure.
Syntax Description
No subcommands.
Default Values
By default, all backup endpoints will automatically attempt dial-backup upon a failure.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series units.
Command History
Release 1.1 Command was introduced.
Release 8.1 ATM sub-interface was added.
Usage Examples
The following example enables automatic dial-backup on the endpoint:
(config)#interface atm 1.1
(config-atm 1.1)#dial-backup auto-backup