ADTRAN 1000R Series - Manual (Page 162)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 162
show bridge <interface> <slot/port> <bridge group #>
Use the show bridge command to display a list of all configured bridge groups (including individual
members of each group). Enter an interface or a bridge number to display the corresponding list.
Syntax Description
<interface> <slot/port> Optional. Displays all bridge groups associated with the specific interface. Type the
show bridge ? command to display a list of applicable interfaces.
<bridgegroup#> Optional. Displays a specific bridge group
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 1.1 Command was introduced.
Release 9.1 Command was expanded to include HDLC interface.
Usage Examples
The following is a sample output from the show bridge command:
>enable
#show bridge
Total of 300 station blocks 295 free
Address Action Interface Age Rx Count Tx Count
00:04:51:57:4D:5A
00:04:5A:57:4F:2A
00:10:A4:B3:A2:72
00:A0:C8:00:8F:98
00:E0:81:10:FF:CE
forward
forward
forward
forward
forward
eth 0/1
eth 0/1
eth 0/1
eth 0/1
fr 1.17
0
0
4
0
0
7133392
402365
2
412367
1502106
7042770
311642
0
231
1486963