ADTRAN 1000R Series - Manual (Page 420)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 420
ip firewall attack-log threshold <value>
Use the ip firewall attack-log threshold command to specify the number of attack mounting attempts the
AOS will identify before generating a log message. Use the no form of this command to return to the
default threshold.
Syntax Description
<value> Specifies the number of attack mounting attempts the AOS will identify before
generating a log message (valid range: 0 to 4,294,967,295).
Default Values
By default, the ip firewall attack-log threshold is set at 100.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 2.1 Command was introduced.
Usage Examples
The following example specifies a threshold of 25 attacks before generating a log message:
(config)#ip firewall attack-log threshold 25
The AOS security features must be enabled (using the ip firewall command) for the stateful
inspection firewall to be activated.