ADTRAN 1000R Series - Manual (Page 43)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 43
clear counters [<interface> <interface id>]
Use the clear counters command to clear all interface counters (or the counters for a specified interface).
Syntax Description
<interface> Optional. Specifies a single interface. Enter clear counters ? or show interface ?
for a complete list of interfaces.
<interface id> Optional. Specifies the ID of the specific interface to clear (e.g., 1 for port channel 1).
Default Values
No default values necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Release 9.1 Command was expanded to include HDLC and tunnel interfaces.
Usage Examples
The following example clears all counters associated with the Ethernet 0/1 interface:
>enable
#clear counters ethernet 0/1