ADTRAN 1000R Series - Manual (Page 741)

Command Reference Guide ATM Sub-Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 741
dial-backup shutdown
Use the dial-backup shutdown command to deactivate all dial-backup functionality in the unit.
Dial-backup configuration parameters are kept intact, but the unit will not initiate (or respond) to
dial-backup sequences in the event of a network outage. Use the no form of this command to reactivate the
dial-backup interface.
Syntax Description
No subcommands.
Default Values
By default, all AOS interfaces are disabled.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series units.
Command History
Release 1.1 Command was introduced.
Release 8.1 ATM sub-interface was added.
Usage Examples
The following example deactivates the configured dial-backup interface:
(config)#interface atm 1.1
(config-atm 1.1)#dial-backup shutdown