ADTRAN 1000R Series - Manual (Page 191)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 191
show gvrp configuration
Use the show gvrp configuration command to show a GARP VLAN Registration Protocol (GVRP)
configuration summary for the switch.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example displays a GVRP configuration summary for the switch:
>enable
#show gvrp configuration
Global GVRP Configuration:
GVRP Feature is currently enabled globally.
GVRP Timers (milliseconds)
Join 200
Leave 600
LeaveAll 20000
Port based GVRP Configuration:
GVRP enabled ports
----------------------------------------------------
eth 0/24
#